2022-01-10
A spotting scope mainly includes the eyepiece, objective lens, focusing wheel, eye mask, and front and rear lens covers. These are all important parts of the scope.
In two steps, first assemble the monocular spot scope, then connect it to the tripod...
The tripod is connected to the monocular
Join the quick release plate on the tripod with the monotube and link it to the tripod.
With the basics of binocular operation, the operation of the monocular telescope is easier to master...
1. Familiar with the various parts on the tripod (different tripods have different operating methods), and be able to master the use of the tripod;
2. When observing, the body is facing the observation target, by moving the handle, the lens of the monocular telescope is aligned with the observation target as much as possible. Observing from the eyepiece, the object is basically in or near the field of view, and then fine-tune up, down, left, and right to make the target In the middle of the field of view (this operation requires repeated practice);
3. Adjust the focus through the focus wheel to make the object clear. If you need to zoom in, adjust the zoom ring to magnify the object to the corresponding multiple (20-60 times) according to your own observation habits...
Contact Us at Any Time
